How to use CMMs safely and reasonably?
When using a CMM, pay special attention to operational safety and machine safety. The following 27 items are listed to share with everyone to ensure safe production and reasonable use of the CMM; 1. Before starting the machine every day, first check that the air supply pressure meets the requirements before opening the control cabinet
How do I use a coordinate measuring instrument?
Three coordinate measuring instruments can be divided into manual three coordinate measuring instruments and automatic three coordinate measuring instruments according to the operation method, and each three coordinate measuring instrument has a different series, and the use methods of different series of three coordinate measuring instruments are different
How does the control system properly protect the three coordinate probe?
The coordinate measuring head system is a detection and aiming system for coordinate measuring machines, which is a highly sensitive sensor. The three coordinate probe generates an aiming signal through its own linear or angular displacement, and the displacement is also limited to a small range
Why should the probe be calibrated when a CMM is measuring?
Before conducting measurement work on a CMM, it is necessary to calibrate the probe. This is a very important work step before conducting measurement. There are two main reasons for correcting the probe. In order to obtain the compensation diameter of the ruby ball of the measuring needle
How to determine whether the CMM software meets the measurement requirements?
CMMs include a host, a probe, a control system, and software components. Whether the CMM software can meet the measurement requirements and enable the operator to quickly adapt is an important key factor affecting measurement efficiency
